Burgener Nebulizers: |
To download a printable price list
in GBP & Euros,
click here. (30 kb .xls format) |
Shipping and Taxes are extra.
All prices are subject to change. |
|
| Burgener Nebulizer prices are based on US prices. In the past two years the Euro and GBP have risen and then dropped compared to the US$. We have adjusted prices occasionally to reflect this. We try to maintain our prices "fixed" for a year, but it is nearly impossible with such wide differences in the exchange rates at present. For Jan 2012 we have increased the US prices by 0 to 4%, which leaves most Euro prices the same as 2011 and most UK prices LOWER than in 2011. We will continue to review the prices throughout the year.
|
| NOTE: we accept both VISA and MC, but we have Canadian accounts, and we must convert the prices to Canadian equivalents when processing VISA and MC. Such conversions will be at the present exchange rates. |
|
|
|
Mira Mist and Ari Mist Nebulizers for ICP and ICP/MS |
Teflon Mira Mist |
 |
|
| Enhanced Parallel Path Teflon Nebulizer. Can operate on 0.2 ml/min to 2.5 ml/min. Excellent mist, and can handle high level of particulates in sample. Fits regular chambers as a direct replacement for glass concentric nebulizers. Operates on standard pressures of 35 - 45 psi. The Teflon Mira Mist can be used for any liquid. Salting is very rare, but can occur over long periods of time, especially with high Sodium levels in the solution. Such salting can be cleared easily with a dip in 5 - 10% HF, (Caution: Be careful when handling HF. It soaks into the skin before you feel it burning, and in low concentrations it looks like water.) |
| Description | Catalog # | GBP Price | Euro Price |
| Teflon Mira Mist | TMM 3500 | £ 700.00 | € 850.00 |
|
|
PEEK Mira Mist |
 |
|
| Same as the Teflon Mira Mist, but easier to make than the Teflon Mira Mist, so you save a little. Works for most samples, but not concentrated acids, and not some organic solvents. Still has Teflon capillaries for the samples and for the gas. Standard pressure (45 psi), low sample flow, enhanced parallel path design. Can operate on 0.2 ml/min to 2.5 ml/min. Excellent mist, and can handle high level of particulates in sample. Fits regular chambers as a direct replacement for glass concentric nebulizers. |
| Description | Catalog # | GBP Price | Euro Price |
| PEEK Mira Mist | PMM 4000 | £ 625.00 | € 750.00 |
|
|
T 2100 |
 |
|
| Enhanced Parallel Path Teflon Nebulizer. Huge Sample Capillary: 750 microns / 1/32 inch. Designed as replacement for T2002 and BTN. Essentially unpluggable with un-dissolved particles. Can operate on 0.5 ml/min to 3.0 ml/min. Excellent mist, but not quite as good as Mira Mist. Can handle very high level of particles in sample. Fits regular chambers as a direct replacement for glass concentric nebulizers. Operates on standard pressures of 30 - 45 psi. The T 2100 can be used for any liquid. Salting is very rare, but can occur over long periods of time, especially with high Sodium levels in the solution. Such salting can be cleared easily with a dip in 5 - 10% HF, (Caution: Be careful when handling HF. It soaks into the skin before you feel it burning, and in low concentrations it looks and feels like water.) |
| Description | Catalog # | GBP Price | Euro Price |
| T 2100 | T 2100 | £ 625.00 | € 750.00 |
|
|
Ari Mist |
 |
|
|
Very low sample flow, enhanced parallel path design. Standard pressure (40 - 50 psi). Black PEEK body, Teflon sample and gas capillaries. Can operate on 0.050 ml/min to 1.0 ml/min. Good for ICP and ICP/MS. Only for samples that are particulate free. Fits regular chambers as a direct replacement for glass concentric nebulizers.
|
| Description | Catalog # | GBP Price | Euro Price |
| Ari Mist |
AM 5000 |
£ 700.00 |
€ 850.00 |
|
|
Ari Mist HP |
 |
|
|
Very low sample flow, enhanced parallel path design. Higher Pressure (80 psi). Black PEEK body, Teflon sample and gas capillaries. Can operate on 0.005 ml/min to 1.0 ml/min. Good for LC/ICP/MS. Only for samples that are particulate free. Fits regular chambers as a direct replacement for glass concentric nebulizers. When run at less than 10 ul/min it provides similar results to direct injection nebulizers, without the difficulties of direct injection.
|
| Description | Catalog # | GBP Price | Euro Price |
| Ari Mist HP |
AM HP 5500 |
£ 750.00 |
€ 950.00 |
|
|
Enya Mist |
 |
|
|
Ultra low sample flow, enhanced parallel path design. Standard Pressure (50 psi). Our lowest flow ICP/MS nebulizer. Runs from 200 nanoliters/minute to 50 ul/min. Designed for ICP/MS - HPLC interface, tiny samples, and for Split flow applications - simple addition of a T connection allows 500 ul/min pumped to nebulizer, with 10 - 20 ul/min delivered to nebulizer. Produces very low oxides in ICP/MS. Can NOT handle high level of particulates in sample. Fits regular chambers as a direct replacement for glass concentric nebulizers. Straight chambers are better than cyclonics - sample drops are lost in cyclonics on the wall beside the injection point.
|
| Description | Catalog # | US$ Price | Cdn$ Price |
| Enya Mist |
EM 6000 |
£ 750.00 |
€ 950.00 |
|
|
Mira Mist CE |
 |
|
|
Designed for ICP/MS - CE interface. Medium pressure (80-90 psi), Very low sample flow (10 ul/min or less), enhanced parallel path design. Can operate on 0.01 ml/min to 2.5 ml/min. With Alcohol solutions can operate down to .001 ml/min. Excellent mist, can handle high level of particulates in sample. Fits regular chambers as a direct replacement for glass concentric nebulizers. Designed for CE / ICP / MS analysis. Allows CE capillary to extend to tip of nebulizer for zero suction, zero back pressure CE interfacing with ICP / MS. Works best with mini chamber.
|
| Description | Catalog # | GBP Price | Euro Price |
| Mira Mist CE |
PMM CE |
£ 2,400.00 |
€ 2,750.00 |
|
|
|
|
|
Other Nebulizers for ICP and ICP/MS |
T2002 |
 |
|
|
Our old original standard nebulizer. Works well on most instruments. Fits most chambers. Best results are with Cyclonic Chambers. The T2002 was scheduled to be discontinued in Jan, 2010. However, we have decided to continue to have it available as long as there is a demand for them, and the one person who can make them continues to do so. For most applications, the T2100 is a better nebulizer since it handles larger particles, lasts longer, and provides virtually the same intensities and stability.
|
| Description | Catalog # | GBP Price | Euro Price |
| T2002 |
T2002 |
£ 680.00 |
€ 775.00 |
|
|
|
|
|
Industrial Nebulizers |
Burgener LB 30 |
 |
|
|
Teflon Low Pressure (35 - 45 psi), High sample flow, Enhanced Parallel Path design. Designed for Industrial Sprays. Virtually unpluggable. Can run saturated solutions without salting up.
|
| Description | Catalog # | GBP Price | Euro Price |
| LB 30 |
LB 30 |
£ 350.00 |
€ 400.00 |
|
|
Burgener SS 50 |
 |
|
Stainless Steel Industrial Nebulizer for hot environments, any length possible, 1/8" OD.
Low Pressure (45 psi) to very high pressure (5,000 psi), Low sample flow to high sample flow (10 uL/min to 10 mL/min), Enhanced Parallel Path design. Designed for Industrial Sprays.
|
| Description | Catalog # | GBP Price | Euro Price |
| SS 50 |
SS 50 |
£ 650.00 |
€ 775.00 |
|
|
|
|
|
|
Accessories |
 |
|
|
Mira Mist and Ari Mist Fittings |
Mira Mist and Ari Mist Gas & Sample Line Fittings |
Mira Mist and Ari Mist nebulizers use 2 mm gas lines and UpChurch finger tight fittings for the gas lines and for the sample lines. Although this allows for simple attachment of GC/LC/CE systems, it is not standard for nebulizers. To ensure simple attachments to your instruments, we have an extensive array of fittings available.
Gas line fittings are usually included with the nebulizer. Please note that we try to send the correct fittings with the nebulizers, but there are many to select from, and we sometimes send the wrong one. Please use the following list to correctly identify your gas fittings and call us for a replacement.
|
| |
| Instrument | Burg Res Part Number |
| . | . |
| Agilent / HP | BRG 200 & P652-Kel-F |
| JY | BRG 204 |
| GBC | BRG 306 |
| Finnigan | BRG 306 |
| Leeman | BRG 306 |
| PE / Sciex Elan ICP/MS (1/4" Swagelok gas lines) | BRG 206 |
| PE Optima 3000 series | BRG 206 |
| PE Optima 2000 & 4000 series | BRG 308 |
| Spectro | BRG 309 |
| Thermo Elemental - TJA ICP (Luer Lock fitting) | BRG 305 |
| Thermo Elemental - VG Elemental ICP/MS pre 2002 | BRG 307 |
| Thermo Elemental - VG Elemental ICP/MS 2002+ | BRG 204 |
| Varian - ICP | BRG 306 |
| . | . |
|
|
|
| 10/32 to Swagelok |
| Description |
Catalog # |
GBP Price |
Euro Price |
|
BRG 103
|
 |
|
|
1/8" Adapter for 1/8" gas lines.
|
BRG 103 |
£ 20.00 |
€ 24.00 |
|
BRG 104
|
 |
|
|
4 mm Adapter for 4 mm gas lines.
|
BRG 104 |
£ 20.00 |
€ 24.00 |
|
BRG 106
|
 |
|
|
1/4" Adapter for 1/4" gas lines.
|
BRG 106 |
£ 20.00 |
€ 24.00 |
|
|
|
| 10/32 to Straight Tube |
| Description |
Catalog # |
GBP Price |
Euro Price |
|
BRG 200
|
 |
|
|
4 mm FEP Adapter for Agilent instruments.
|
BRG 200 |
£ 34.00 |
€ 39.00 |
|
BRG 203
|
 |
|
|
1/8" Adapter.
|
BRG 203 |
£ 20.00 |
€ 24.00 |
|
BRG 204
|
 |
|
|
4mm Adapter for JY, VG X-series, Thermo ICP/MS instruments. |
BRG 204 |
£ 20.00 |
€ 24.00 |
|
BRG 214
|
 |
|
|
4 mm Adapter as supplied with JY nebulizers. Not for other instruments.
|
BRG 214 |
£ 20.00 |
€ 24.00 |
|
BRG 206
|
 |
|
|
1/4" Adapter for PE Optima 3000 series, PE Sciex ICP/MS.
|
BRG 206 |
£ 20.00 |
€ 24.00 |
|
|
|
| 10/32 to Quick Release |
| Description |
Catalog # |
GBP Price |
Euro Price |
|
BRG 304
|
 |
|
|
Luer Lock / Quick Release
|
BRG 304 |
£ 20.00 |
€ 24.00 |
|
BRG 305
|
 |
|
|
Luer Lock / Quick Release for TJA / Thermo ICP
|
BRG 305 |
£ 20.00 |
€ 24.00 |
|
BRG 306
|
 |
|
|
Quick Release for Finnigan, GBC, Leeman, Varian.
|
BRG 306 |
£ 20.00 |
€ 24.00 |
|
BRG 307
|
 |
|
|
Quick Release for non X series VG Elemental / Thermo ICP/MS.
|
BRG 307 |
£ 30.00 |
€ 35.00 |
|
BRG 308
|
 |
|
|
Quick Release for PE Optima 2000 and 4000 series.
|
BRG 308 |
£ 20.00 |
€ 24.00 |
|
BRG 309
|
 |
|
|
Quick Release for Spectro.
|
BRG 309 |
£ 20.00 |
€ 24.00 |
|
|
|
| 4mm Festo Quick Release |
| Description |
Catalog # |
US$ Price |
Cdn$ Price |
|
BRG 404
|
 |
|
NEW for 2009
Quick Release for 4 mm gas line.
Same style as on many glass nebulizers such as GE EzyLok.
Replaces MM 1020 gas line & BRG 204.
4 mm gas line not included.
|
BRG 404 |
£ 15.00 |
€ 17.50 |
|
|
|
| 2 mm Gas Line |
| Description |
Catalog # |
GBP Price |
Euro Price |
|
MM 1020
|
 |
|
|
2 mm gas line with UpChurch fingertight fittings for Mira Mist and Ari Mist nebulizers.
|
MM 1020 |
£ 18.00 |
€ 21.00 |
|
BRC 20
|
 |
|
|
Black PEEK UpChurch fingertight fitting for 2mm OD gas or sample lines. Used as the standard fitting for our MM 1020 gas lines.
|
BRC 20 |
£ 7.50 |
€ 8.75 |
|
|
|
|
|
| Alternative Adapters for Gas or Sample Lines - Standard UpChurch Parts. |
| Description |
Catalog # |
GBP Price |
Euro Price |
|
F 100N
|
 |
|
|
Kef-F Natural UpChurch fingertight fitting for 1/16" (0.0625") OD sample lines.
|
F100N |
£ 9.00 |
€ 10.00 |
|
F 120
|
 |
|
|
PEEK Natural UpChurch fingertight fitting for 1/16" (0.0625") OD sample lines.
|
F120 |
£ 9.00 |
€ 10.00 |
|
P 307
|
 |
|
|
M6 Upchurch fitting for 2 mm gas or sample lines. Fits in P650 UpChurch adapter. Needs a P342 ferrule. |
P 307 |
£ 2.50 |
€ 3.00 |
|
P 308
|
 |
|
|
1/4 28 Upchurch fitting for 1/8" gas or sample lines. Fits in P652 UpChurch adapter. Needs a P300 ferrule. |
P 308 |
£ 2.50 |
€ 3.00 |
|
P 300
|
|
|
|
Ferrule for P308 Upchurch fitting for 1/8" gas or sample lines.
|
P 300 |
£ 2.50 |
€ 3.00 |
|
P 342
|
|
|
|
Ferrule for P307 Upchurch fitting for 2mm gas or sample lines. |
P 342 |
£ 2.50 |
€ 3.00 |
|
P 650
|
 |
|
|
M6 Upchurch Adapter for 1/8", 2mm and 1/16" gas or sample lines. Fits in place of the MM 1020 gas line or in place of the sample line. If bought from UpChurch directly, the small bit protruding at the tip must be cut off. Allows M6 fittings to be used to attach gas and sample lines directly to the nebulizer.
|
P 650 |
£ 13.50 |
€ 15.75 |
|
P 652
|
 |
|
|
1/4 28 Upchurch Adapter for 1/8" and 1/16" gas or sample lines. Fits in place of the MM 1020 gas line or in place of the sample line. If bought from UpChurch directly, the small bit protruding at the tip must be cut off. Allows 1/4 28 fittings to be used to attach gas and sample lines directly to the nebulizer.
|
P 652 |
£ 13.50 |
€ 15.75 |
|
P 652-Kel-F
|
 |
|
|
Kel-F 1/4 - 28 Upchurch Adapter for 1/16" sample lines for Agilent Instruments. Allows 1/4 28 fittings to be used to attach gas and sample lines directly to the nebulizer. |
P 652-Kel-F |
£ 22.75 |
€ 26.00 |
|
M 100
|
 |
|
|
Kel-F 10/32 Upchurch Fingertight fitting for 0.020" sample lines. If bought from UpChurch directly, the small bit protruding at the tip must be cut off. |
M 100 |
£ 19.00 |
€ 22.00 |
|
|
|
|
|
| Sample Line Fittings |
| Description |
Catalog # |
GBP Price |
Euro Price |
|
BRC 1
|
 |
|
|
Red UpChurch fingertight fitting for 0.035" OD sample lines.
|
BRC 1 |
£ 7.50 |
€ 8.75 |
|
BRC 2
|
 |
|
|
Yellow UpChurch fingertight fitting for 0.044" OD sample lines.
|
BRC 2 |
£ 7.50 |
€ 8.75 |
|
BRC 3
|
 |
|
|
Blue UpChurch fingertight fitting for 0.044" OD sample lines.
|
BRC 3 |
£ 7.50 |
€ 8.75 |
|
BRC 4
|
 |
|
|
KelF Natural UpChurch fingertight fitting (UpChurch part # F100N) for 0.0625" OD sample lines.
|
BRC 4 |
£ 7.50 |
€ 8.75 |
|
BRC 5
|
 |
|
|
PEEK Natural UpChurch fingertight fitting (UpChurch part # F120) for 0.0625" OD sample lines.
|
BRC 5 |
£ 7.50 |
€ 8.75 |
|
BRC 7
|
 |
|
|
Black UpChurch fingertight fitting for 0.045" OD sample lines.
|
BRC 7 |
£ 7.50 |
€ 8.75 |
|
BRC 8
|
 |
|
|
KelF Natural UpChurch fingertight fitting for 0.062" OD sample lines.
|
BRC 8 |
£ 7.50 |
€ 8.75 |
|
BRC 20
|
|
|
|
Black PEEK UpChurch fingertight fitting for 2mm OD gas or sample lines. Used as the standard fitting for our MM 1020 gas lines.
|
BRC 20 |
£ 7.50 |
€ 8.75 |
|
| Sample Line |
| Description |
Catalog # |
GBP Price |
Euro Price |
|
BRC 101
|
 |
|
|
3 meters of .035" OD X .008" ID Red Teflon Tubing for sample lines.
|
BRC 101 |
£ 30.00 |
€ 35.00 |
|
BRC 102
|
 |
|
|
3 meters of .044" OD X .020" ID Clear PTFE Tubing for sample lines.
|
BRC 102 |
£ 30.00 |
€ 35.00 |
|
BRC 103
|
 |
|
|
3 meters of .044" OD X .017" ID Clear Polyethylene Tubing for sample lines.
|
BRC 103 |
£ 30.00 |
€ 35.00 |
|
BRC 104
|
|
|
|
3 meters of 1/16" (.0625") OD X .020" ID PTFE Tubing for sample lines.
|
BRC 104 |
£ 30.00 |
€ 35.00 |
|
BRC 105
|
|
|
|
3 meters of 2mm OD X 1mm ID PTFE Tubing for gas lines.
|
BRC 105 |
£ 30.00 |
€ 35.00 |
|
BRC 106
|
|
|
|
3 meters of .062" OD X .030" ID HP PFA Tubing for sample lines. |
BRC 106 |
£ 56.50 |
€ 65.00 |
|
BRC 107
|
|
|
|
3 meters of .045" OD X .025" ID HD Polyethylene Tubing for T2100 sample lines.
|
BRC 107 |
£ 30.00 |
€ 35.00 |
|
BRC 108
|
|
|
|
3 meters of .062" OD X .030" ID FEP Tubing for T2100 sample lines. |
BRC 108 |
£ 30.00 |
€ 35.00 |
|
BRC 111
|
 |
|
|
30 meters of .035" OD X .008" ID Red Teflon Tubing for sample lines.
|
BRC 111 |
£ 150.00 |
€ 175.00 |
|
BRC 112
|
 |
|
|
30 meters of .044" OD X .020" ID Clear PTFE Tubing for sample lines.
|
BRC 112 |
£ 150.00 |
€ 175.00 |
|
BRC 113
|
 |
|
|
30 meters of .044" OD X .017" ID Clear Polyethylene Tubing for sample lines.
|
BRC 113 |
£ 220.00 |
€ 255.00 |
|
BRC 114
|
|
|
|
30 meters of 1/16" (.0625") OD X .020" ID PTFE Tubing for sample lines.
|
BRC 114 |
£ 180.00 |
€ 210.00 |
|
BRC 115
|
|
|
|
30 meters of 2mm OD X 1mm ID PTFE Tubing for gas lines.
|
BRC 115 |
£ 150.00 |
€ 175.00 |
|
BRC 116
|
|
|
|
30 meters of .062" OD X .030" ID HP PFA Tubing for T2100 sample lines. |
BRC 116 |
£ 275.00 |
€ 315.00 |
|
BRC 117
|
|
|
|
30 meters of .045" OD X .025" ID HD Polyethylene Tubing for T2100 sample lines.
|
BRC 117 |
£ 150.00 |
€ 175.00 |
|
BRC 118
|
|
|
|
30 meters of .062" OD X .030" ID Clear FEP Tubing for T2100 sample lines.
|
BRC 118 |
£ 150.00 |
€ 175.00 |
|
| Sample Line Fittings & Sample Line |
| Description |
Catalog # |
GBP Price |
Euro Price |
|
BRC 201
|
 |
|
0.5 meters of .035" OD X .008" ID
Red PTFE Tubing with attached M100-C1 fitting for sample lines.
|
BRC 201 |
£ 15.00 |
€ 17.50 |
|
BRC 201X
|
 |
|
10 Pack of BRC 201:
0.5 meters of .035" OD X .008" ID
Red PTFE Tubing with attached BRC 1 fitting for sample lines.
|
BRC 201X |
£ 75.00 |
€ 87.50 |
|
BRC 202
|
 |
|
0.5 meters of .044" OD X .020" ID
Clear PTFE Tubing with attached BRC 2 fitting for sample lines.
|
BRC 202 |
£ 15.00 |
€ 17.50 |
|
BRC 202X
|
 |
|
10 Pack of BRC 202:
0.5 meters of .044" OD X .020" ID
Clear PTFE Tubing with attached BRC 2 fitting for sample lines.
|
BRC 202X |
£ 75.00 |
€ 87.50 |
|
BRC 203
|
 |
|
0.5 meters of .044" OD X .017" ID
Clear Polyethylene Tubing with attached BRC 3 fitting for sample lines.
|
BRC 203 |
£ 15.00 |
€ 17.50 |
|
BRC 203X
|
 |
|
10 Pack of BRC 203:
0.5 meters of .044" OD X .017" ID
Clear Polyethylene Tubing with attached BRC 3 fitting for sample lines.
|
BRC 203X |
£ 75.00 |
€ 87.50 |
|
BRC 204
|
 |
|
0.5 meters of .062" OD X .020" ID
Clear Teflon Tubing with attached F100N fitting for sample lines.
|
BRC 204 |
£ 13.50 |
€ 17.00 |
|
BRC 204X
|
 |
|
10 Pack of BRC 204:
0.5 meters of .062" OD X .020" ID
Clear Teflon Tubing with attached F100N fitting for sample lines.
|
BRC 204X |
£ 110.00 |
€ 122.00 |
|
BRC 206
|
|
|
0.5 meters of .062" OD X .030" ID
HP PFA Tubing with attached F100N fitting for sample lines.
|
BRC 206 |
£ 30.00 |
€ 35.00 |
|
BRC 206X
|
|
|
10 Pack of BRC 206:
0.5 meters of .062" OD X .030" ID
HP PFA Tubing with attached F100N fitting for sample lines. |
BRC 206X |
£ 190.00 |
€ 220.00 |
|
BRC 207
|
 |
|
0.5 meters of .045" OD X .025" ID
HD Polyethylene Tubing with attached BRC 7 fitting for T2100 sample lines.
|
BRC 207 |
£ 15.00 |
€ 17.50 |
|
BRC 207X
|
 |
|
10 Pack of BRC 207:
0.5 meters of .045" OD X .025" ID
HD Polyethylene Tubing with attached BRC 7 fitting for T2100 sample lines.
|
BRC 207X |
£ 75.00 |
€ 87.50 |
|
BRC 208
|
 |
|
0.5 meters of .062" OD X .030" ID
FEP Tubing with attached BRC 8 fitting for T2100 sample lines.
|
BRC 208 |
£ 18.00 |
€ 21.00 |
|
BRC 208X
|
 |
|
10 Pack of BRC 208:
0.5 meters of .062" OD X .030" ID
FEP Tubing with attached BRC 8 fitting for T2100 sample lines.
|
BRC 208X |
£ 90.00 |
€ 100.00 |
|
BRC 2000
|
 |
|
|
0.5 meters of .062" OD X .020" ID PTFE with attached UpChurch 1/4-28 Kel-F fitting for 1/16" sample lines and P652-Kel-F adapter.
|
BRC 2000 |
£ 35.00 |
€ 42.00 |
|
BRC 2000X
|
|
|
|
10 pack of 0.5 meters of .062" OD X .020" ID PTFE with attached UpChurch 1/4-28 Kel-F fitting for 1/16" sample lines and P652-Kel-F adapter.
|
BRC 2000X |
£ 175.00 |
€ 220.00 |
|
|
|
|
|
T2002, Trace and Legere Fittings |
T2002, Trace and Legere Fittings |
| . |
The T2002, Trace and Legere Nebulizers have Swagelok or barb attachments for the gas lines, and all use the same capillary tubing for the sample lines (0.42" - 0.44" OD). The T2002 ships with 1/4", 1/8" and 4 mm Swageloks for European customers, and with only the 1/4" and 1/8" fittings for US customers. Surge Suppressors are available for the T2002 and Trace Nebulizers. They are not necessary for most systems, but are useful for some pumps and chambers.
|
| T2002, Trace and Legere Fittings |
| Description |
Catalog # |
GBP Price |
Euro Price |
|
BRC 102
|
|
|
|
3 meters of .044" OD X .020" ID Clear PTFE Tubing for sample lines.
|
BRC 102 |
£ 30.00 |
€ 35.00 |
|
BRC 103
|
|
|
|
3 meters of .044" OD X .017" ID Clear Polyethylene Tubing for sample lines.
|
BRC 103 |
£ 30.00 |
€ 35.00 |
|
BRC 112
|
|
|
|
30 meters of .044" OD X .020" ID Clear PTFE Tubing for sample lines.
|
BRC 112 |
£ 150.00 |
€ 175.00 |
|
BRC 113
|
|
|
|
30 meters of .044" OD X .017" ID Clear Polyethylene Tubing for sample lines.
|
BRC 113 |
£ 220.00 |
€ 255.00 |
|
BRC S1
|
| |
|
Surge Suppressor for reducing variations in sample flow due to the peristaltic pump.
|
BRC S1 |
£ 9.50 |
€ 11.00 |
|
BRC S1X
|
 |
|
|
10 pack of Surge Suppressor for reducing variations in sample flow due to the peristaltic pump.
|
BRC S1X |
£ 60.00 |
€ 70.00 |
|
|
|
|
|
Chambers and Chamber Adapters |
|
|
|
Chamber Adapters |
Chamber Adapters |
| . |
Burgener Nebulizers will fit most chambers without adapters. Generally, if you are presently using a glass concentric nebulizer, you can use the same adapters for Burgener Nebulizers. However, if you have been using larger crossflow nebulizers, or have older style chambers, then you will need an adapter. All of our adapters are PTFE.
|
| Teflon® Chamber Adapters |
| Description |
Catalog # |
GBP Price |
Euro Price |
|
TADP-5
|
| |
|
Adapter for Mira Mist & Ari Mist for Scott Double Pass Chambers. Fits 35mm exterior chambers. |
TADP-5 |
£ 135.00 |
€ 160.00 |
|
TADP-3
|
| |
|
Adapter for T2002 for Scott Double Pass Chambers. Fits 35mm exterior chambers. |
TADP-3 |
£ 135.00 |
€ 160.00 |
|
TABG-1
|
| |
|
General adapter for 0.94 inch interior chambers. Used on TCR-1, and some Burgener Research glass chambers. |
TABG-1 |
£ 135.00 |
€ 160.00 |
|
|
|
|
|
Teflon® Chambers |
Teflon® Chambers |
| . |
For most applications, glass chambers are preferred. Glass chambers are readily available, inexpensive, and transparent allowing you to see if the system is operating properly. For samples requiring HF acids, Teflon® chambers are preferred.
|
| Teflon® Chambers |
| Description |
Catalog # |
GBP Price |
Euro Price |
|
MC CE
|
 | |
|
Mini Teflon® Chamber. For Mira Mist CE, Ari Mist, at micro flows only (<20 ul/min). Immediate washout - similar to direct injection but much easier to install and use. A glass version is available as part number GC CE2.
|
MC CE |
£ 490.00 |
€ 570.00 |
|
TSDP 01
|
 | |
|
Teflon® Scott Double Pass Chamber. Standard Scott type chamber, 100% Teflon, no "O" rings. The nebulizer adapter is available as a press fit version with no "O" rings or with "O" rings for glass nebulizers. Works with standard 35 mm adapters and cross flow nebulizers. The Drain is available at various angles.
|
TSDP 01 |
£ 680.00 |
€ 775.00 |
|
|
|
|
|
Glass Chambers |
Glass Chambers |
| . |
For most applications, glass chambers are preferred. Glass chambers are readily available, inexpensive, and transparent allowing you to see if the system is operating properly. For samples requiring HF acids, Teflon® chambers are preferred. Generally we recommend that you get glass chambers from glass blowing companies as they specialize in them and we do not. However, at present mini chambers are not a common item, so we have it listed here for your convenience.
|
| Glass Chambers |
| Description |
Catalog # |
GBP Price |
Euro Price |
|
MGC CE2
|
| |
|
Mini Glass Chamber. For Mira Mist CE, Ari Mist, at micro flows only (<20 ul/min). Immediate washout - similar to direct injection but much easier to install and use. The glass version is about 9 ml in volume, and uses a hose with a ball joint fitting to connect to the torch.
|
MGC CE2 |
£ 215.00 |
€ 240.00 |
|
|
|
|
|
Discontinued Nebulizers and Chambers |
Discontinued Nebulizers and Chambers |
| . |
The following Nebulizers and chambers have been discontinued due to our other nebulizers and chambers being so much better. They are no longer available. We have no stock on the BTS 50 or Legere Nebulizers, nor on the TCA 03 or TCR 97, and they are no longer available. The Graphite Mira Mist has rarely ever been requested, so it is being discontinued as a stock item, but for special needs may be available with a very long (2 months) delivery. We still have some Trace Nebulizers in stock, and they are available until they are sold out.
|
Graphite Mira Mist HS |
 |
|
| Same as Teflon Mira Mist, but flat nose and 25% graphite body reduces drops forming at the tip and being re-introduced into the aerosol. Drops being re-introduced are chamber specific, and few chambers have the problem. For those with a drip problem, the GMM HS helps. Not recommended for GE Cyclonic chambers as they do not have the problem. Works for all liquids, as with 100% Teflon. |
| Description | Catalog # | GBP Price | Euro Price |
| Graphite Mira Mist HS | GMM-HS 4500 |
£ 880.00 |
€ 1100.00 |
| |
Burgener Trace |
 |
|
High salts, high solids, virtually unpluggable, Teflon Nebulizer. Once was exclusively available from Thermo Elemental. Has been replaced with the T2100 which is a longer lasting nebulizer with virtually identical operating sensitivity and stability. Optimized for the TJA Trace ICP, TJA Iris, and Cyclonic Chambers. The Trace was discontinued as of January 2008. We still have some Trace Nebulizers in stock and will sell them until the inventory runs out. They still carry a 3 month warranty.
|
| Description | Catalog # | GBP Price | Euro Price |
| Burgener Trace |
BTN |
£ 400.00 |
€ 450.00 |
|
|
Burgener Legere |
 |
|
|
High pressure (120 psi), medium sample flow, V Groove design. Fits 0.94" ID chambers. Uses TADP -2 adapter for Scott type chambers. Ideal for low sample flow, high particulate solutions.
|
| Description | Catalog # | GBP Price | Euro Price |
| Legere |
LTF |
Not Available |
Not Available |
|
|
Burgener Flex 50 |
 |
|
|
Stainless Steel and Nylon Nebulizer. Low Pressure (35 - 45 psi), High sample flow, Enhanced Parallel Path design. Designed for Industrial Sprays. Flexible Nebulizer. Bend it to any shape!
|
| Description | Catalog # | GBP Price | Euro Price |
| Flex 50 |
Flex 50 |
Not Available |
Not Available |
|
|
Burgener OSN 100 |
 |
|
|
Brass Nozzle. Easily removed for quick replacement. No adjustable parts - it just works well all the time. Standard shop pressure (35 - 120 psi), High sample flow, Parallel Path design, large droplet size, does not include gas and liquid attachments which are necessary but designed for each situation and priced accordingly.
|
| Description | Catalog # | GBP Price | Euro Price |
| OSN 100 |
OSN 100 |
Not Available |
Not Available |
|
|
BTS 50 |
 |
|
|
General nebulizer for chambers requiring adapters, such as Scott Double Pass chambers. Shorter nose than T2002, otherwise the same as a T2002. Does not fit most cyclonics.
|
| Description | Catalog # | GBP Price | Euro Price |
| BTS 50 |
BTS 50 |
Not Available |
Not Available |
|
|
TCR 97
|
 | |
|
Smaller Teflon® Chamber. Good washout. Designed for Scott Double Pass replacement. Fits most systems. Same exterior size as Scott Double Pass. No Adapter required.
|
TCR 97 |
Not Available |
Not Available |
|
TCR 97C
|
 | |
|
Same as TCR-97 without insert. Medium washout. Same exterior size as Scott Double Pass. Adapter TABG-1 included. Works with standard 35 mm adapters and cross flow nebulizers.
|
TCR 97C |
Not Available |
Not Available |
|
TCA 03
|
 | |
|
Teflon® Burgener Flip Over Chamber. Similar to standard Scott type chamber, but with flip-over interior producing faster washout. 100% Teflon, no "O" rings. The nebulizer adapter is available as a press fit version with no "O" rings or with "O" rings for glass nebulizers. The Drain is available at various angles.
|
TCA 03 |
Not Available |
Not Available |
|
TADP-1
|
| |
|
Adapter for Legere for Scott Double Pass Chambers. Fits 35mm exterior chambers. |
TADP-1 |
£ 190.00 |
€ 220.00 |
|
TADP-2
|
| |
|
Adapter for BTS 50 for Scott Double Pass Chambers. Fits 35mm exterior chambers. |
TADP-2 |
£ 190.00 |
€ 220.00 |
|
TADP-4
|
| |
|
Same as Tadp-2 Adapter, but with insert for Mira Mist. For Scott Double Pass Chambers. Fits 35mm exterior chambers. |
TADP-4 |
Not Available |
Not Available |
|
|
|
| . |
Teflon is a registered trademark of E.I. DuPont De Nemours Company and in all cases in this web page refers to PTFE (PolyTetraFluoroEthylene)
|
|
|
